In chemistry, a buffer is a solution that maintains the same approximate pH despite the addition of a modest amount of an acid or base by releasing or absorbing H+ ions. Typical buffers are weak acids dissolved in their conjugate base, for example a solution of NH4+ and NH3. A buffer of carbonic acid (H2CO3) and bicarbonate (HCO3-) is present in the human blood stream to maintain a pH between 7.35 and 7.45.
In telecommunication, the term buffer has the following meanings:
Note: Buffers are used for many purposes, such as (a) interconnecting two digital circuits operating at different rates, (b) holding data for use at a later time, (c) allowing timing corrections to be made on a data stream, (d) collecting binary data bits into groups that can then be operated on as a unit, (e) delaying the transit time of a signal in order to allow other operations to occur.
2. To use a buffer or buffers.
3. An isolating circuit, often an amplifier, used to minimize the influence of a driven circuit on the driving circuit. Synonym buffer amplifier .
4. In a fiber optic communication cable, one type of component used to encapsulate one or more optical fibers for the purpose of providing such functions as mechanical isolation, protection from physical damage and fiber identification.
Note: The buffer may take the form of a miniature conduit, contained within the cable and called a loose buffer, or loose buffer tube, in which one or more fibers may be enclosed, often with a lubricating gel. A tight buffer consists of a polymer coating in intimate contact with the primary coating applied to the fiber during manufacture.