ENCYCLOPEDIA 4U .com

 Web Encyclopedia4u.com

# Ackermann steering geometry

Ackermann steering geometry is a geometric arrangement of linkages in the steering of a car or other vehicle designed to solve the problem of wheels on the inside and outside of a turn needing to trace out circles of different radii.

This engineering solution is attributable to Langensperger in 1816, but was patented by arrangement in London, in 1817, by someone called Ackermann whose name stuck to it! The same idea was also developed in France in the late 1870s, by Bollee and Jeantaud.

When a vehicle is steered, it follows a path which is part of the circumference of its turning circle, which will have a centre point somewhere along a line extending from the axis of the fixed axle. The steered wheels must be angled so that they are both at 90 degrees to a line drawn from the circle centre through the centre of the wheel. Since the wheel on the outside of the turn will trace a larger circle than the wheel on the inside, the wheels need to be set at different angles.

The Ackermann steering geometry arranges this automatically by moving the steering pivot points inward so as to lie on a line drawn between the steering kingpins and the centre of the rear axle. The steering pivot points are joined by a rigid bar, which is usually also part of the steering mechanism, for example a rack and pinion. This arrangement ensures that at any angle of steering, the centre point of all of the circles traced by all wheels will lie at a common point.

Modern cars do not use 'pure' Ackermann steering, partly because it ignores important dynamic and compliant effects, but the principle is sound for low speed manouevres.

Content on this web site is provided for informational purposes only. We accept no responsibility for any loss, injury or inconvenience sustained by any person resulting from information published on this site. We encourage you to verify any critical information with the relevant authorities.